A500: A590 SCSI controller mods
As I don't have a SCSI HD and because I had a spare PCD-50B SCSI Multicard Reader so I thought about attaching this instead :)
Ofc in order for all LUNS to be fully recognized (and not only the first LUN that is the PCMCIA port) you need to switch the Pin 4 of the Dip switch to ON!
Manual as long as BBOAH say that it's reserved but Mechware after fiddling around he realized that Pin 4 enabled parity!
Anyway, I put some spacers by cutting some hotglue material (lol) and glued them in place. It doesn't look bad :)
After upgrading my Version 6.6 EPROMS to 7.0 (regards to my Willem) we were down to business.
Success, Power led opened and also my custom ClassicWB 68k booted just fine! :)
Time to remove the humongous thick Fan and put a silent Scythe/Kaze 40x40x10mm fan instead.
And voila. Mod is ready and A590 works like a charm :)