Misc Amiga upgrades and new games
To say the last month has been busy is an understatement. I have had so much to do for work, setting up a new office in Japan, and other overseas projects also in progress.
Finding time for the Amiga has been challenging, with trips overseas in August and this month meaning little time to spend on playing with them.
First up is an interesting game called Renegades Deluxe, available on a recent Amiga Addict Magazine cover disk:
It is so much more satisfying to use Amigas as they were intended to be used. I used my Amiga 500 for trying this game out:
I have to say, this game has a sort of bitmap brothers graphical style, not sure if that was intended but I like it anyway. I found it fun to place - kinda similar to Alien Breed in the gameplay.
Getting through the maps is satisfying, and I am impressed with the quality of the graphics in it for sure - it kept me busy for a while!
I also received a package of "new" titles from Vesalia. I was looking on their website while I was travelling for titles I may have missed out on, and I found a few so I grabbed them - some newish, some quite old.
SQRXZ IV is a typical Amiga platform game, which somehow I missed out on getting until now. It is not a bad game, but nothing that really stands out from plenty of other similar games on the Amiga.
I also tried out Marbelous
Last year I bought a game called Connect digitally, as it was not possible to ship the boxed version to Australia at that time. Now though, it is possible, so I made sure to pick up this Japanese inspired puzzle game:
It came on a CD and some disk labels, which I wrote out to a real floppy to use on my Amiga. You can also hard disk install this game, which is great! I recommend this game - it is challenging!
I ran this on my Amiga 1200 and it is quite an enjoyable dungeon crawler style game, reminding me of playing Obitus, Eye of the Beholder and Hired Guns.
I love that it has a automap feature, which makes it much less painful to navigate around than the older games which required graph paper!
Moving onto hardware, I found this interesting hardware for sales on eBay for Amiga 600/1200 called AURA. Audible Reality? I had never heard of this before - have you?
It looks like a sound sampler for the Amiga, but unlike most of them which use the parallel port, this one uses the PCMCIA port on the Amiga 600 and 1200. This is totally new to me!
It allows the Amiga audio to pass through it also, which means you can just have one output to the speakers, which is very handy.
With no pass through, I have to unplug my Squirrel SCSI adapter or CDROM drive PCMCIA connectors though in order to use it. This means it is unlikely to be permanently connected to the Amigas, as I am more likely to use the CD drives. I will try it out soon though.
Space is an issue with these large external drives, so the new shelves I bought to raise the height of the screens allowed me to position the CD drive underneath, allowing enough room for the Amiga 1200's to still sit side by side o the same desk.
The cable from the Squirrel SCSI is short, so it didn't allow me to position the drive on top of the shelf as I would have preferred. Clearly it was intended to put the drive to the left side of the A1200, but also clearly I have no space for that. fitting the Squirrel scsi PCMCIA adapter in between is challenging enough!
The cable for this drive is even shorter than the Squirrel SCSI adapter cable, so that is going to be a challenge for sure!
Luckily, the drive is very low profile, and can fit alongside the A500 floppy drive, while actually being lower than the drive eject button!
The Amiga drivers were included on the floppy disk confusingly labelled DOPUS - they included DOPUS to make the copying easier I guess.
Once installed per the included instructions, I was pleased to say the CD drive worked straight away - I tested with an Aminet CD.
I suspect he recycled the Amiga Power themed vinyl LP floppy disk from an earlier release for the floppy here too, as it says Amiga Power rather than fitting the Amiga Action theme of the cover. But no matter.
Regardless of the vinyl condition in my case, it is great to see modern musicians using Amigas in the music creation process in 2023!
I also chose the additional optional power adapter card that allows you to provide additional power to the card to support powering USB external hard disks, rather than being limited to powering basic USB sticks only (without a external powered USB hub of course).
I didn't bother buying the USB port cables since I have plenty from the failed rapid road devices. I connect ed one to the optional power board, which includes a floppy power splitter, one side goes to the internal floppy drive, the other to the optional board connected to the subway 2021.
Close up showing the connections. Note that there is no protection if you connected the power cable or the clock port the wrong way - you will fry the subway 2021 board if you get it wrong, almost 100% guaranteed. Be careful, and double check the connections per the included instructions.
As the USB ports need to be threaded out the expansion port at the rear of the case, I needed to take out the floppy drive also...
With that done, you can see the Indivision AGA card with the cable that usually runs under the floppy drive. There is space to the right to feed the USB cables through.
Here is the cables feed through. I am aware there is an Omniport available now that can clean this up and present an external DVI/HDMI and USB from the respective cards..I should probably look into that!
Next issue I found is that this A1200 motherboard has a full set of pins for the clock port. Normally only the right side half pins are actually present. I had to break off the pins in the left side immediately adjacent to the clock port connector so that the subway clock port connector would actually fit!
I am using the optional power connector board to supply more power to the subway 2021 in this setup also, and so the floppy drive power splitter is now also in place connected to the subway 2021 optional card and the floppy drive power.
I am intrigued by the readme that says the ANAIIS works under AmigaOS 1.3 also. Now that would be cool - USB support on my 1.3 Amiga. I'll have to try that on my Amiga 1000 later!
Also installed is a seperate tool called Massive, which is used to help mount larger USB drives. Note that for me, I needed to add a FILESYSTEM=fat95 line to the INFO tool types for the Massive program before it could see the larger USB sticks.
I inserted a 16GB USB stick and it came up, although it was very slow initially while it was validating the disk. This took a few minutes, during which the system was jerky and slow to respond. After validating finished the system returned to normal.
At this point I noted that the usb stick was VERY VERY hot. I suspected it was to do with the optional power board, so I powered off the Amiga, and took it off...
Sometimes you can hit try and it goes away, other times it does it ten times or more before it goes away. There are clearly problems.
The Vampire 1200 has the A1200.net case with the USB port cutouts on the right side, which makes it a lot neater to connect up.
The same behaviour happens on the Vampire 1200 system though - USB sticks mounted via Massive have this long validation periods and errors on read. Smaller USB sticks do not show at all.
It is good that USB kinda works, but it is pretty useless at the moment. I need to read up more and see if anyone else has seen and solved this issue.
I then put my older E3B Subway card into the Amiga 600 - I did this as it has a clockport slot on the A604n especially designed for it, so no clockport cable is needed.
Since this older E3B subway is supported by Poseidon USB stack, it works fine.
I will need to keep working to understand the problems with the Subway 2021 and ANAIIS software support of usb sticks. There is hopefully a simple reason for why it is not working for me.
I read something the other day about apparently needing to format the USB sticks to a specific format in the RDB first for them to work, which seems very clunky considering FAT is so standard and Poseidon USB stick supports it perfectly...surely not?
In the meantime, that is it for now.
I will be away from my Amigas for a bit and having a small break from work too, so likely will not have time to update the blog again until late October. Until then, please enjoy your Amigas and please look over the many other blog posts I have written!
If you have some tips on how to resolve the issues I found with ANAIIS and USB sticks please let me know in the comments here, or via Facebook if you are friends with me there!